INSTRUCTIONS FOR APPLYING DECALS

1. Rubbing a corner with finger, split double paper, then peel a little for finger hold.

2. With a soft cloth ( never a brush), apply a thin coat of cement to paint side of the transfer. Let it dry for a few minutes until it becomes tacky.

3. With a sponge, generously dampen the wood where transfer is to be applied. Apply decal to properly centered location and roll firmly from center towards edges, to eliminate air blisters and excess water.

4. Soak the heavy paper, then strip off carefully. 

5. Wipe off the excess glue with a soft cloth impregnated with turpentine.